Welcome visitor you can login or create an account.

Ahuja Sound Solutions PA Audio Splitter AMX-1412

  • Input Channels : Each Channel has separate 1/4” balanced phone jack for Mic and Line & accepts both balanced & unbalanced signals.
  • AUX Control : This controls the level of the channel in the final mix to Aux Send output.
  • AUX Send & AUX Return : These have been provided for sending the pre-fader output of channels for monitoring or for adding a Special Effects Unit.
  • MONO/STEREO Output : Mono output is available from either Left & Right output jacks when the switch is in ‘Mono’ position.
PA Audio Mixing Consoles
Power Requirements AC: 220-240V 50/60Hz DC: 24v (2×12V Car Battery)
MIC Input (Impedance/Gain) 2k/62dB
LINE Input (Impedance/Gain) 20k Balanced/42dB, 10k Unbalanced/42dB
Distortion < 0.08%
Frequency Response 30Hz - 20kHz (+0, -1dB)
Tone Controls Bass : ±12dB at 100Hz Mid : ± 12dB at 2kHz Treble : ± 12dB at 10kHz
Outputs Line Output LO -10dBm/+2dBm (200mV/1V) Line Output HI 0dBm/+17dBm (775mV/5.5V)
Echo/Reverb System Digital Signal Processing
Signal to Noise Ratio >70dB (0dBm, 0.775V)

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: